NIPPON FUSSO CO.,LTD. Japanese
+81-3-3688-3237Osaka (head office) +81-72-361-3391
Inquiries about fluoropolymer coatingInquiries
Company Profile
Products

  Problems solved by fluoropolymer coating
Function
Non-stick
Anti-corrosion
High purity(counter elution)
High purity(counter particle)
Anti-electrostatic discharge
Low friction
Insulation
Application
Reactor
Stock
Dryer
Transportation, Handling
Mixing
Absorption/Adsorption
Separation/Filtration
Scaling
Coater
Semiconductor manufacturing device
Liquid Crystal/Organic Electroluminescent Manufacturing Equipment
Molding
Accessories
Laboratory equipments
Original Our Product (Coating Specifications)  
Ceramic Coating : NF-5340 NEW
Aμcoat®
EC Series
Anti ESD Coating (ESD=Electro Static Discharge)
Richil lining
Tack free
Original Our Product (Design/Manufacture of Apparatuses)
Heat Exchanger NEW
Non-metal PEC
List of Fluoropolymer Grades

Surface Treatment Technology Research Center
Privacy Policy

NIPPON FUSSO CO.,LTD.
2-4-6, Mokuzaidori, Miharaku,
Sakai, Osaka
Postal Code: 587-0042
TEL +81-72-361-3391
FAX +81-72-363-1230

HOMEProducts > Ceramic Coating : NF-5340


Ceramic Coating : NF-5340

NF-5340 is new type surface treatment with high hardness and easy-releasing.

Comparison with existing fluoropolymer coating, it is expected to have abrasion resistance and anti-scratch performance while cleaning. Furthermore, it has superior releasing feature against high adhesive materials than fluoropolymer coating. Tack-free coating; rough surface coating with thermal spray, has been recommended against sticking adhesives. NF-5340 achieved "Easy-releasing" and "Smooth surface". In addition, whitish color is superior in visual check while cleaning.

Movie


Features of Ceramic Coating : NF-5340

Color Metallic White
Film Thickness Approximately 20 to 30 microns
Roughness *1
(n=5 average)
(Arithmetic average:Ra) 0.440 microns
(Maximum height:Rz) 2.925 microns
Pencil Hardness > 9H
Drop Impact Test *2 Conformed (No damage observed)
Contact Angle against Water *3 98.7 degree
Repellency against Permanent Marker Good
Peeling Force of Packing Tape *4
(Average Peel-off force)
0.1N
Heat Resistance of Non-stick property 200 degree Celsius
Kinetic Friction Coefficient *5 0.36

<> Figured values are representing measured results, not an assurance for performance
<> Testing substrates are SUS304 and A5052
*1 Figure varies on pre-treatment roughness and film thickness.
Roughness of pre-treatment : Ra: 2.67 microns Rz: 20.215 microns
*2 Based on JIS 5600-5-3 "Drop Impact Test" Film thickness: 33.3 microns in average.
*3 Case(PTFE) : 114 degree (referred from Fluoropolymer Handbook)
*4 Based on JIS Z0237 10 "Pressure sensitive tape and sheet Method" (90 deg. peel-off test)
Measured value of PTFE: 4.0N to 7.5N
*5 Based on JIS K7125 "Friction Coefficient Test Method of Plastic Film and Sheet"
Friction Coefficient of PTFE: 0.1(referred from Fluoropolymer Handbook)


Please inquire us for fluoropolymer coating.Do not hesitate to contact us.
Tokyo Osaka(head office)
TEL.+81-3-3688-3237 TEL.+81-72-361-3391
Inquiries